SuperServer 6011Hi (SYS-6011-Hi)
  • Dual or Single Intel Pentium III Processors up to 1.4o GHz and faster with 512K L2 cache
  • Up to 4GB ECC registered PC133/100 SDRAM memory
  • 4 two-way interleaved memory modules provide outstanding memory performance
  • 25 degree slots for better airflow
Front Side BUS
  • 133/100MHz
  • ServerWorks ServerSet III HE-SL
I/O Expansion
  • 1 64/32-bit, 66/33MHz PCI 
Onboard I/O Devices
  • 2 Intel 82559 Ethernet controller
  • 1 Intelligent Platform Management Interface ver. 1.5 (optional)
  • ATI Rage XL 8MB AGP graphic controller
  • Dual Ultra DMA (UDMA/100) bus master/EIDE channels support data transfer rates of up to 100 MB/sec
  • 2 Fast UART 16550 compatible serial ports
  • 2 USB ports
  • PS/2 keyboard and mouse ports
  • 4MB AMI Flash ROM
  • BIOS rescue recovery feature
  • Hardware BIOS virus protection
  • ACPI/APM power management PnP
  • PXE headless support
  • SC810 (CSE-0036-P)
Form Factor
  • 1U Rackmount
Power Supply
  • 250W power supply (PWS-0019)
  • To ensure system stability, a 250W power supply is required for dual PIII systems.
  • Auto-switching 100/240 AC power
SCA Subsystem
  • 2 3.5" IDE drive bays
Cooling Subsystem
  • 1 10 cm. blower fan
External Drive Bays
  • 1 Floppy drive
  • 1 Slim CD-ROM
Other Features
  • ACPI/APM power management
  • Onboard AOL2 (Alert-on-LAN2) controller chip (optional)
  • PC'99 color-coded I/O connectors
  • WOL (wake-on-LAN) connector
  • Internal/external modem wake-up
  • Control of power-on mode for recovery from AC power loss
  • Chassis intrusion detection
PC Health Monitoring
  • 4 Onboard voltage monitors for CPU 
  • 4 Fan status
  • Environmental temperature monitor and control
  • Chassis and CPU overheat alarm, LED indication and control
  • System resource alert
  • Supermicro System Management utility
  • Width: 16.7 in.
  • Height: 1.7 in.
  • Depth: 22 in.
  • Weight: 17.6 lb. (Net) 22 lb. (Gross)

Information source: Supermicro, Inc.
All product information on this site is based solely on information made available by the respective vendors,
other products and companies referred to herein are trademarks or registered trademarks of their respective companies. Twin Micro, Inc.  disclaims any responsibility for this information or the products listed or any typo error. Product information may be inaccurate and is subject to change without notice. You should contact the vendors with any question about the products or the information presented.

Copyright © 2003 Twin Micro, Inc. All right reserved.
For any comment, please contact