SuperWorkstation 7043A-i (SYS-7043-Ai)
  • Dual Intel® Xeon™ Processors of up to 2.80GHz with a 512K L2 cache
  • Up to 12GB DDR SDRAM in 6 DIMM sockets*
  • Supports only registered ECC memory
Front Side BUS
  • 533/400MHz
  • Intel E7505
I/O Expansion
  • 1 8xAGP Pro 1.5V
  • 1 64-bit 133MHz PCI-X
  • 2 64-bit 100MHz PCI-X
  • 2 32-bit 33MHz PCI
Onboard I/O Devices
  • Dual EIDE ports support Ultra DMA 100MB/s of Burst data transfer rate, supports UDMA Mode 5, PIO Mode 4 and ATA/100
  • Intel 82545EM Gigabit Ethernet controller
  • AC'97 audio CODEC high quality 6-channel sound
  • 1 Floppy
  • 2 Fast UART 16550 serial ports
  • 1 ECP/EEP parallel port
  • 4 USB2.0 ports
  • PS/2 keyboard and mouse ports
  • 4Mb Flash ROM
  • BIOS rescue recovery feature
  • Hardware BIOS virus protection
  • Console redirection
  • PXE headless support
  • SC742i-450 
  • Rackmount Kit optional (CSE-PT26)
Form Factor
  • 4U Rackmountable Tower
Power Supply
  • Redundant Cooling "Low-Noise" 450W power supply 
  • Auto-switching 100/240 AC power
SCA Subsystem
  • 7 x 3.5" IDE internal drive bays
Cooling Subsystem
  • 1 9cm hot-plug "low-noise" cooling fan
  • 1 Heavy-duty 12cm "low-noise" exhaust fan
External Drive Bays
  • 1 3.5" 1.44MB Floppy drive
  • 3 5.25" Drive bay
Other Features
  • ACPI/APM power management
  • PC'99 color-coded I/O connectors
  • Internal/external modem wake-up
  • Control of power-on mode for recovery from AC power loss
  • Chassis intrusion detection
PC Health Monitoring
  • 4 Onboard voltage monitors for CPU 
  • 4 Fan status
  • Environmental temperature monitor and control
  • Chassis and CPU overheat alarm, LED indication and control
  • LAN LED, power fail LED
  • System resource alert
  • Supermicro System Management utility(option)
  • LDCM (LANDesk Client Manager)
  • LDSM (LANDesk Server Manager) option
  • SuperO Doctor software (optional)
  • Width: 7"
  • Height: 17.1"
  • Depth: 24.2"

Information source: Supermicro, Inc.
All product information on this site is based solely on information made available by the respective vendors,
other products and companies referred to herein are trademarks or registered trademarks of their respective companies. Twin Micro, Inc.  disclaims any responsibility for this information or the products listed or any typo error. Product information may be inaccurate and is subject to change without notice. You should contact the vendors with any question about the products or the information presented.

Copyright © 2003 Twin Micro, Inc. All right reserved.
For any comment, please contact